ANALYSIS OF THE VIABILITY OF PREFABRICATED ELEMENTS FOR PARTITIONS MANUFACTURED WITH PLASTER AND EPS FROM WASTE RECYCLING

Authors

  • CESAR PORRAS AMORES
  • JAIME SANTA CRUZ ASTORQUI
  • MERCEDES DEL RIO MERINO
  • PAOLA VILLORIA SAEZ
  • CARMEN VIÑAS ARREBOLA

Keywords:

Construction and Demolition Waste, Partition, Gypsum, Sustainable Constructions, Recycling, Residuos de construcción y demolición, Particiones, Yeso, Construcción sostenible, Reciclaje.

Abstract

The objective of this paper is to study the viability of the use of gypsum with EPS from recycling to manufacture elements for the construction of interior partitions. This paper presents several proposals as construction elements for inner partitions made with gypsum and expanded poliestirene (EPS) from construction and demolition waste, as well as summarizing the results obtained in the different tests carried out to verify their mechanical behavior and in this way compare them with similar construction elements that are currently commercialized. In this work, carried out under the Waste to Resources (W2R) project, different block solutions are studied, all based on a sandwich panel system, in which the outer faces of the block are formed by a 6 mm thick gypsum board, enclosing a core formed with a low density material, and therefore, high deformability. Key words: Construction and Demolition Waste; Partition; Gypsum; Sustainable Constructions; Recycling.

Downloads

Published

2019-07-01

Issue

Section

ARTICULOS